1. Cover. The belt furnace cover is composed of a steel plate shell, furnace lining, and a top hanging beam. The outer cover is the structural support of the entire Cheapest Mesh Belt Furnace body, and a pair of guide rings at the lower part are sleeved on the guide columns with slightly different heights on both sides of the furnace to ensure that the outer cover and the center line of the furnace are coincident.
2. Inner cylinder. The function of the inner tube of the Cheapest Mesh Belt Furnace is to separate the flue gas airflow space where the workpiece is located from the controlled airflow space. The inner cylinder has good sealing performance, strong temperature resistance and oxidation resistance, and a certain rigidity. It can increase the heat transfer area, reduce deformation and prolong the service life.3. Convection tube. The function of the convection cylinder of a Cheapest Mesh Belt Furnace is to ensure that the material being processed is isolated from the inner cylinder and to provide a convective channel for controlled airflow. The results show that the high flow velocity of the gas in the annular gap is beneficial to the heat transfer between the gas flow and the inner cylinder.
4. Furnace bottom stirring fan. There is a stirring fan in the center of the bottom of the Cheapest Mesh Belt Furnace. During the heating process, a controlled airflow passes through the annular gap between the convection tube and the inner tube, which captures heat and transfers it to the workpiece. The mixer adopts a frequency conversion motor, which can adjust the furnace temperature according to the furnace temperature, the speed is accurate, and the use and maintenance are convenient.
5. Burner. The burner system of the Cheapest Mesh Belt Furnace consists of a burner, a fan, a piping system, and a smoke exhaust pipe. The burners are distributed tangentially along the outer cover of the furnace, which is beneficial to the uniform furnace temperature and reduces the local overheating of the inner cover. The straight inner cylinder is the heating source of the Mesh Belt Furnace.